MaxiGrip Board Rework

maxiGRIP™ and Board Rework Costs

Advanced Thermal Solutions Inc

This tutorial discusses use of the latest technology to attach heat sinks to BGA devices that minimizes potential damage to either the component or the PCB itself during the rework process.

Related Parts

BildeManufacturer Part NumberBeskrivelseTilbehørsmetodeFormTilgjengelig antall PrisVis detaljer
HEAT SINK 27MM X 27MM X 12.5MMATS-52270G-C1-R0HEAT SINK 27MM X 27MM X 12.5MMTermisk tape, Lim (inkludert)Square, Angled Fins90 - Immediate$122.65Vis detaljer
HEAT SINK 25MM X 25MM X 14.5MMATS-51250K-C1-R0HEAT SINK 25MM X 25MM X 14.5MMKlemme, Termisk materialSquare, Angled Fins0 - Immediate$140.18Vis detaljer
HEAT SINK 33MM X 33MM X 7.5MMATS-52330B-C1-R0HEAT SINK 33MM X 33MM X 7.5MMTermisk tape, Lim (inkludert)Square, Angled Fins77 - Immediate$108.90Vis detaljer
HEAT SINK 27MM X 27MM X 14.5MMATS-53270K-C1-R0HEAT SINK 27MM X 27MM X 14.5MMKlemme, Termisk materialKvadrat, Ribber607 - Immediate$155.95Vis detaljer
HEAT SINK 25MM X 25MM X 12.5MMATS-50250G-C1-R0HEAT SINK 25MM X 25MM X 12.5MMKlemme, Termisk materialSquare, Angled Fins935 - Immediate$162.41Vis detaljer
HEAT SINK 23MM X 23MM X 12.5MMATS-50230G-C1-R0HEAT SINK 23MM X 23MM X 12.5MMKlemme, Termisk materialSquare, Angled Fins50 - Immediate$160.44Vis detaljer
HEAT SINK 19MM X 19MM X 12.5MMATS-50190G-C1-R0HEAT SINK 19MM X 19MM X 12.5MMKlemme, Termisk materialSquare, Angled Fins32 - Immediate$157.73Vis detaljer
HEAT SINK 21MM X 21MM X 12.5MMATS-50210G-C1-R0HEAT SINK 21MM X 21MM X 12.5MMKlemme, Termisk materialSquare, Angled Fins100 - Immediate$158.95Vis detaljer
HEAT SINK 19MM X 19MM X 9MMATS-56001-C1-R0HEAT SINK 19MM X 19MM X 9MMTermisk tape, Lim (inkludert)Square, Angled Fins1266 - Immediate$82.70Vis detaljer
PTM Published on: 2011-10-13

Related Videos

ATS Explains - Thermal Interface Material
ATS Explains - Thermal Interface Material

Publish Date: 2018-01-26

Advanced Thermal Solutions - maxiGRIP
Advanced Thermal Solutions - maxiGRIP

Publish Date: 2012-10-15

Related Product Highlight

Heat Sink Attachment Solutions Advanced Thermal Solutions' heat sink attachments give engineers multiple options to mechanically attach almost any heat sink to PCBs.
maxiFLOW™ with maxiGRIP™ Heatsinks ATS BGA cooling solutions with maxiGRIP attachment come preassembled with phase change thermal interface materials for easy installation/removal.

Related Articles and Blogs

Feasibility Study of an LED-Based Lighting System Using Analytical Modeling A study of the heat loads for an outdoor LED-based lighting system using analytical modeling to determine the feasibility of the design with solar heat load.
Device Thermal Coupling on a PCB A look at how components on a printed circuit board thermally couple and the design considerations that help minimize heat dissipation problems.
Air Flow Measurement in Electronic Systems An analysis of circuit board air flow measurement techniques and the considerations required to obtain an accurate reading in this complex environment.

Related Product Training Modules

Introduction to Heat Sinks This module will review the use of heat sinks, including how a heat sink works, the factors that impact heat sink thermal performance, common heat sink materials, and thermal interface materials.
maxiGRIP™ Flip-Chip Overview of the maxiGRIP Flip-Chip and review of importance of selecting the correct TIM.
Phase Change - Pressure Increase maxiGRIP™ ATS maxiGRIP and superGRIP are ideal solutions when used with phase change TIM for increased thermal and mechanical performance.
Vilkår og betingelser Personvernerklæring Innstillinger for informasjonskapsler (cookies)
Copyright © 1995-2026, DigiKey. Med enerett.
ECIA Member
This site is protected by VikingCloud's Trusted Commerce program
ECIA Member