Texas Instruments

MSP430F5529 Mixed-Signal MCU

Texas Instruments' MSP430F5529 16-bit ultra-low-power MCU consists of several devices featuring peripheral sets targeted for a variety of applications

Image of Texas Instruments' MSP430F5529 Mixed-Signal MCUTexas Instruments' MSP430F5529 mixed-signal microcontroller (MCU) is part of the ultra-low-power MSP430 MCU family. This TI MCU is configured with integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit ADC, and a real-time clock module with alarm capabilities. The TI MSP430F5529 has 63 I/O pins, compared to 47 I/O pins on the MSP430F5528.

Typical applications include analog and digital sensor systems, data loggers, and other applications requiring connectivity to various USB hosts.

 

Features
  • Low supply voltage range: 3.6 V down to 1.8 V
  • Ultra-low power consumption
    • Active mode (AM):
      • All system clocks active:
        • 290 µA/MHz at 8 MHz, 3.0 V, Flash program execution (typ)
        • 150 µA/MHz at 8 MHz, 3.0 V, RAM program execution (typ)
    • Standby mode (LPM3):
      • Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wake up:
        • 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (typ)
      • Low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wake up:
        • 1.4 µA at 3.0 V (typ)
    • Off mode (LPM4):
      • Full RAM retention, supply supervisor operational, fast wake up:
        • 1.1 µA at 3.0 V (typ)
      • Shutdown mode (LPM4.5):
        • 0.18 µA at 3.0 V (typ)
  • Flexible power management system
    • Fully integrated LDO with programmable regulated core supply voltage
    • Supply voltage supervision, monitoring, and brownout
  • Unified clock system
    • FLL control loop for frequency stabilization
    • Low-power low-frequency internal clock source (VLO)
    • Low-frequency trimmed internal reference source (REFO)
    • 32 kHz watch crystals (XT1)
  • High-frequency crystals up to 32 MHz (XT2)
  • Wake up from standby mode in 3.5 µs (typ)
  • 16-bit RISC architecture, extended memory, up to 25 MHz system clock
  • 16-bit timer TA0, timer_A with five capture/compare registers
  • 16-bit timer TA1, timer_A with three capture/compare registers
  • 16-bit timer TA2, timer_A with three capture/compare registers
  • 16-bit timer TB0, timer_B with seven capture/compare shadow registers
  • Two universal serial communication interfaces
    • USCI_A0 and USCI_A1 each support:
      • Enhanced UART supports automatic baud-rate detection
      • IrDA encoder and decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1 each support:
      • I2C
      • Synchronous SPI
  • Full-speed universal serial bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3 V and 1.8 V USB power system
    • Integrated USB-PLL
    • Eight input and eight output endpoints
  • 12-bit analog-to-digital converter (ADC) (MSP430F552x only) with internal reference, sample-and-hold, and autoscan feature
  • Comparator
  • Hardware multiplier supports 32-bit operations
  • Serial onboard programming, no external programming voltage needed
  • Three-channel internal DMA
  • Basic timer with RTC feature

MSP430F5529 Mixed-Signal MCU

ImageManufacturer Part NumberDescriptionAvailable QuantityPrice
IC MCU 16BIT 128KB FLASH 80LQFPMSP430F5529IPNIC MCU 16BIT 128KB FLASH 80LQFP611 - Immediate$116.69View Details
IC MCU 16BIT 128KB FLASH 80LQFPMSP430F5529IPNRIC MCU 16BIT 128KB FLASH 80LQFP2457 - Immediate$98.90View Details

Evaluation Modules and Dev Boards

ImageManufacturer Part NumberDescriptionAvailable QuantityPriceView Details
EVAL BOARD BQ76PL536 MSP430F5529BQ76PL536EVM-3EVAL BOARD BQ76PL536 MSP430F55291 - Immediate$4,812.42View Details
EVAL BOARD FOR MSP430F5529EV2400EVAL BOARD FOR MSP430F5529257 - Immediate$2,400.18View Details
LAUNCHPAD MSP430F5529 EVAL BRDMSP-EXP430F5529LPLAUNCHPAD MSP430F5529 EVAL BRD904 - Immediate$156.70View Details
EXPERIMENTER MSP430F5529 EVAL BDMSP-EXP430F5529EXPERIMENTER MSP430F5529 EVAL BD0 - Immediate$2,198.66View Details
Published: 2013-06-17

Related Videos

Texas Instruments 2024 electronica interview: Energy infrastructure applications
Texas Instruments 2024 electronica interview: Energy infrastructure applications

Publish Date: 2025-01-29

Texas Instruments 2022 electronica Interview – Enabling Smarter, Safer and More Scalable Robots of Tomorrow
Texas Instruments 2022 electronica Interview – Enabling Smarter, Safer and More Scalable Robots of Tomorrow

Publish Date: 2022-12-29

What is a Voltage Regulator Another Teaching Moment | DigiKey
What is a Voltage Regulator Another Teaching Moment | DigiKey

Publish Date: 2020-08-27

Related Product Highlight

EPD Extension Kit Gen 2 Pervasive Displays EPD Extension Kit Gen 2 is designed for interfacing TI LaunchPad development boards with any of its e-paper displays.
BQ25887 Battery Charger with Cell Balancing Texas Instruments' BQ25887 battery charger can be configured as an I2C controlled device and 2s battery charger for Li-Ion and Li-polymer batteries.
bq25882 2 A Boost-Mode Battery Charger Texas Instruments' bq25882 boost-mode battery charger is ideal for Li-Ion and Li-polymer batteries used in portable devices such as smartphones.

Related Articles and Blogs

Use C2000 Real-Time MCUs to Develop Cost and Energy-Efficient EV Motor Power Control Designs Using C2000 series real-time MCUs and support tools and reference designs, designers can quickly and efficiently implement EV and HEV power control designs.
Accelerate Automotive and IoT BLDC Motor Application Development with the A4964KJPTR-T Motor Driver Get BLDC motor applications up and running quickly and efficiently using the A4964KJPTR-T dedicated motor driver IC.
Motion Control Profiles: Good, Better, and Best Effective motor control requires careful adjustment of the motion profile parameters; advanced controllers ease the task and provide superior performance.

Related Product Training Modules

Communication Solutions for Industrial Automation Learn about communication interfaces on MSP430 MCUs for factory automation, their benefits, and solutions that will reduce development time.
LaunchPad Temboo Integration A brief overview of the Temboo service and its support for connected Texas Instruments LaunchPad hardware.
Introduction to Real-Time Operating Systems and SYS/BIOS Discuss the differenece between a Standard Operating and Real Time Operating Systems as well as an overview of SYS/BIOS and Static Configuration.