RIIM IP Mesh Network - Radiocrafts

Product Highlights > RIIM™ IP Mesh Network

            RIIM™ IP Mesh Network
                    Radiocrafts’ RIIM network supports mist computing, over-the-air updates, and doesn’t require a license or subscription fee
    

Image of Radiocraft's RIIM™ IP Mesh Network Radiocrafts' RIIM (Radiocrafts industrial IP mesh) is an embedded RF system designed to be a long-range, all-inclusive, 100% automatic, easy-to-use mesh, with direct IP addressing. The RF protocol is the IEEE802.15.4 g/e standard. RIIM also includes ICI, where an ICI application is always running on the module to tailor the module's behavior to the customer's unique requirements.

In its simplest form, the ICI application is just configuring the radio network, the modules' hardware interfaces, and defines when to read and write to those interfaces. This means that any sensor/control unit can be interfaced directly to the IPM module. RIIM supports mist computing, over-the-air updates, and does not require any license or subscription fee.

The IPM module is the core of the network and supports the complete RIIM network. The module can be configured as a border router, mesh router, or leaf node depending on the customers' requirements in the mesh. Each node has a CoAP client/server to provide IP level access and a complete border router boxed product with Ethernet interface is available from Radiocrafts.

RIIM targets networks where fast time to market/low engineering effort is desired.

Features

Short development time
IP to the sensors/controllers from the cloud
Self-forming, self-healing mesh network, no setup at installation
Highly reliable with time-slotted channel hopping (TSCH)
40 km x 40 km urban coverage
Support for local and network-wide multicast messages
Low latency, high throughput network via adaptive frequency agility
1000 nodes per gateway
Very low power for battery operation

868 MHz / 915 MHz, software configurable
Connects to any sensor chip/controller via Radiocrafts' ICI framework
Future proof by over-the-air (OTA) update
Tailor-made solutions available through Radiocrafts' design services
Designed to meet tough industrial requirements
All modules are fully tested before shipping
Time synchronous nodes
Three modes of operation: cloud connectivity, private network, or via an edge gateway

Applications

Smart street lighting
Smart irrigation
EV chargers
Emergency lighting for buildings
Security and safety

Agriculture
Solar farms and windmills
Smart city
Smart building
Energy management system

RIIM™ IP Mesh Network

Manufacturer Part Number	Description	Available Quantity	View Details
RC1882HPCF-IPM	HIGH POWER MODULE FOR RIIM	3934 - Immediate	View Details
RC1882HP-RIIM-DK	DEVELOPMT KIT FOR RIIM HIGH PWR	19 - Immediate	View Details
RC1892HPCF-IPM	HIGH POWER MODULE FOR RIIM	389 - Immediate	View Details
RC1892HP-RIIM-DK	DEVELOPMENT KIT FOR RIIM HIGH PO	17 - Immediate	View Details
RC1882CEF-IPM	RX TXRX MOD ISM < 1GHZ CAST SMD	0	View Details
RC1882-RIIM-DK	DEVELOPMENT KIT FOR RIIM	34 - Immediate	View Details
RC1882CEF-IPM-DB	RIIM DEVELOPMENT BOARD	9 - Immediate	View Details
RC1882CEF-IPM-BRB	RIIM BORDER ROUTER BOARD	6 - Immediate	View Details
RC1882CEF-IPM-SB	RIIM SENSOR BOARD	9 - Immediate	View Details

Updated: 2021-04-07

Published: 2019-08-09

Related Product Training Modules

RIIM Series Overview This presentation will review the challenges in reaching the performance needed for a good industrial network and show an existing solution that can be implemented with very little effort.

Related Product Highlight

RIIM Boards for Cloud-to-Sensor Prototype Network by RIIM™ Radiocrafts' RIIM boards for cloud-to-sensor prototype network by RIIM™ come pre-configured and can be modified using RIIM SDK.