DCA Pro PC Software Installation Guide Datasheet by Peak Electronic Design Limited

| Download PDF Datasheet

P ~K® elecvomc deswgn ltd www eakelec o k downloads dca rosetu

Don’t plug in your DCA Pro yet.

You must install the software first!

For Windows XP,

please see the 2

page.

For Windows Vista, 7, 8 and 10

please read this page:

Vista and Windows 7, 8 and 10 – DON’T PLUG IN JUST YET!

1. Make sure you have the latest Windows Updates and Service Pack.

2. Run “Setup.exe” on the supplied USB flash drive. Alternatively, download and run the file from our

website: www.peakelec.co.uk/downloads/dcaprosetup.exe

3. During the setup process, you may be asked to install .NET Framework 4. The installation files for

that are included on the USB stick and don’t need to be downloaded. If you’re using the

downloaded DCA Pro software installation then you may be prompted to additionally

download .NET Framework 4. Accept the Microsoft agreement and the process will complete in a

few minutes (sometimes up to 10 minutes).

4. Some systems may warn you that the driver is not signed, this is ok and it is fine to accept the

warning and proceed. The DCA Pro software itself and the installation file are digitally signed by

Peak Electronic Design Ltd.

5. When the DCA Pro software installation is complete, you can plug in your DCA Pro to a convenient

USB socket. It’s best to choose a socket directly on your computer rather than a hub.

6. Windows should install the drivers automatically although it can take a minute or two. You should

see the driver installation activity in the bottom right of your screen.

7. If prompted, let Windows download the latest WinUSB drivers. That can take a few minutes.

8. After a few moments, your DCA Pro should chime and your software is ready to

use. Double click the new desktop DCA Pro icon and you should see the

“DCA Pro connected” message in the bottom left of the program’s window.

Before you

plug

into your PC you

must read this!

p . — elemmc dew" "d www eakelec o k downloads dca rosetu \ Found ”(w unaware Wrnvd Welcome to the Found New Hardware Wizam TN: ward hdusyau man ”Rwanda Peak Mas WmUSE Dewce ') lmmmmmhmiﬂﬂ‘ImCD Wulluwyﬁi‘fiumilml What an you warn the wxzard m m (‘7 mam‘ .dp r: “Wm a h: Manama Iceman (Mvancedl Cluzk Mama :mﬂmue _-ﬂ Found New Nardware Wizard Pam chm-e mm and imﬂaim mam, r: mummmnmm wwwmmmmuwﬂwmw.mmw pit-“mien”: mmmlumub-mm m—hmmmwmmhuHR Whammm mmmmmmnmmmmmﬂ _-u-=«

Windows XP – DON’T PLUG IN JUST YET!

1. Make sure you have the latest Windows Updates and Service Pack 3.

2. Run “Setup.exe” on the supplied USB flash drive. Alternatively, download and run the file from our

website: www.peakelec.co.uk/downloads/dcaprosetup.exe

3. During the setup process, you may be asked to install .NET Framework 4. The installation files for

that are included on the USB stick and don’t need to be downloaded. If you’re using the

downloaded DCA Pro software installation then you may be prompted to additionally

download .NET Framework 4. Accept the Microsoft agreement and the process will complete in a

few minutes (sometimes up to 10 minutes).

4. When the DCA Pro software installation is complete, you can plug in your DCA Pro to a convenient

USB socket. It’s best to choose a socket directly on your computer rather than a hub.

5. You should be presented with the

following window:

Make sure you select “Install from a list

or specific location” and then click Next.

6. You will then be presented with the

following window:

Make sure the box “Include this location

in the search” is checked.

It should already be filled with the

location for the Peak Driver.

Then click Next.

7. After a few moments, your DCA Pro should chime and your software is ready to

use. Double click the new desktop DCA Pro icon and you should see the

“DCA Pro connected” message in the bottom left of the program’s window.

Products related to this Datasheet

ATLAS DCA PRO - ADVANCED SEMICON

DCA75