Search / Ordering
This article explains what an LED is and how to optimize LED performance through the correct choice of a driver and power supply.
The MIC94300 is an integrated load switch that incorporates Micrel’s Ripple Blocker™ active filter technology.
Wireless power enables applications where it is difficult or impossible to use a connector to deliver power.
The bq24210/2 series of devices are highly integrated, Li-ion, linear charging devices targeted at space-limited portable applications.
Current sensors are either open- or closed-loop. Open-loop current sensors measure AC and DC currents and provide electrical isolation between the circuit being measured and the output of the sensor.
See the benefits of GaN technology in resonant wireless power transfer systems. Both a class 2 system capable of up to 10 W and a class 3 system capable of up to 16 W are showcased.
The MAX17710GB20 evaluation kit is a fully assembled and tested PCB that contains all the components necessary to evaluate the performance of the MAX17710GB energy-harvesting charger and protector.
Forget to move your clothes out of the washer or dryer? This project will show you how to set up a text alert to any cellphone when wash/dry cycles are complete using the BeagleBone Green or BeagleBone Black.
3-D printer demonstration highlighting the significant reduction in noise provided by Trinamic's TRAMS board.
Watch a demo of IDT’s wireless power reference kit for P9025 which incorporates a wireless power transmitter (P9038-R-EVK) and a wireless power receiver (P9025AC-R-EVK).
The solar-LED streetlight controller consists of one 80 W battery charger and one 25 W LED driver. During the daytime, the charger converts the electricity from the solar panel and charges the battery.
Terms & Conditions
Phone: 800 15 286Toll: +31 53 484 9584Fax: +31 53 484 9583
Copyright © 1995-2017, Digi-Key Electronics.All Rights Reserved.701 Brooks Avenue South,Thief River Falls, MN 56701 USA